Product Description

4 Axis 1325 Wood Carving Machine with Independent Rotary Axis Holder 

Application

Woodworking products, advertising signs, MDF board, cutting engraving Photo frame, sculpture the sofa and the head of a bed, All kinds of wood door carvings, Large furniture relief engraving, Dalle hollow out  and simple copper aluminum plastic board, etc

Features

1.Welded T type steel tube structure as a whole with vibration Temper aging treatment ensures no deformation for long time.Cast iron Gantry, the structure is strong and stable.

2. Aluminum T slot working table, part which on the top of rotary axis is removable,more convenient and easy to take off.

3. Imported Hiwin, Taiwan Linear square guide rail with ball bearing slide block which ensure high weight capacity,  high precision, smooth and steady running. Adopt imported precision ball screws, tools feeded with more accuracy.

4. Large power 5.5kw water cooling spindle which is with stable performance, lower noise, powerful and high torque, matched with high-performance frequency inverter.

5.  China famous 86BYGH450B stepper motor and Leadshine stepper driver for XYZ-axis,  high precision, fast speed and more stable, dual motor Driven Y axis with traveling speed up to more than 25000mm/min.

6. Helical gears pinion and rack transmission for X and Y axis, higher running speed and efficiency, saving cost. Z- axis with precision ball screw, high precision and more durable.

7. Vacuum adsorption system with 5.5kw air cooling vacuum pump,  vacuum table which is divided into 6 zones,can adsorb different size materiel from small to big, saving materials load-unloaded time.

8. DSP offline control system with USB interface which is completely off from Computer. More Humanized design with Simple and Convenient Handle type operation.With per-calculation rule, fully excavating potentialities of motors. Enable high processing speed, synchronization of Curve and straight line, more perfect curve working and Spindle start up and stop automatically.

9. Extended gantry with independent diameter 200mm, working length 2500mm rotary axis holder, saving the labor and improving working efficiency, rotary axis holder can be taken off before packing for limited container width.

10. Semi-auto lubrication system,more convenient for maintenance. 

11. Auto tool calibration, more convenient for each time Z-axis 0 point setting.

12. Favorable compatibility with various CAM softwares such as Type3/Artcam/Mastercam/Caxa. With intelligent over limit protection function which can stop the mechanical collision due to unproper size given to the design.

13. With the function of Break-point memory,power failure resuming and automatic home/origin correction function, effectively ensure long time working precision.

 

Technical Parameters

Effective working area	1300(X)mm*2500(Y)mm*300(Z)mm
4th axis	Rotary axis, diameter 300mm, working length 1200mm, reduction gear transmission
Materials	More thickness T type steel pipe welded machine holder bed, cast iron gantry
Working table	Aluminum T slot working table, part is removable
Moving type	Gantry moving
Guide rail	Linear square guide rail ( Hiwin, Taiwan)
Transmission	Helical rack &pinion for X Y -axis, Lead ball screw for Z-axis
Driving mode	Leadshine hybrid servo motor 863HSM80H-E1 and driver H2-2206 for XYZA-axis
Spindle motor	3.2kw, water cooling
Spindle speed	0-24000rpm
Collets type	ER20
Inverter	Sunfar
Voltage	AC 220V+ 10%, 50/60Hz, single phase or AC 380V+ 10%, 50/60Hz, three phases
Traveling speed	>25000mm/min
Engraving speed	>12000mm/min
Machine accuracy	0.02mm
Repositioning accuracy	0.02mm
Diagonal error	0.2mm
Control system	Mach3, 4 axis, with USB port
Suitable software	Artcam, Type3, Ucancam V9,etc
Carving Instructions	G code *Uoo *mmg *plt HPGL
Running environment temperature	0-45 ℃
Relative humidity	30%-75%
Lubrication system	Auto
Tool calibration	Auto
Certificate	CE

Reference Working Videos

https://www.youtube.com/watch?v=bf95oZ8rldM&t=20s

https://www.youtube.com/watch?v=7ufbVmvVDj8&t=52s&list=PLZ2SG5kTfvfMdMhdO-MbVH4IDtNuOyEHG&index=1

 

                                             For more information, just feel free to contact us!

     Jinan Upgoal Mechanical Equipment Co.,Ltd

     CNC Router/Laser Engraving Cutting Marking Machine/Plasma Cutting Machine

 

 

Payment Terms︰ T/T, L/C, Western Union, MoneyGram...

Product Image